What to pay attention to when processing injection molding type molds

Injection molds are one of the most widely used molds in the cosmetic industry and in the processing of daily necessities. In the process of mold processing, the entire production process and related details should be done, otherwise it may lead to the accuracy of the mold is affected.
 

1, the surface of the injection mold must be smooth
During the production of injection molds, if the surface of the mold is not smooth enough, it will affect the surface finish of the subsequent products, but also easy to increase the possibility of mutual adhesion between the finished plastic products and the mold, ultimately leading to a significant reduction in the finished product qualification rate. Therefore, in the process of mold processing, it is important to make the details of the parts more detailed, for the subsequent production of related products to lay a good foundation.
 

2, do a good job in the design and development of the relevant mold work
The appearance of injection molding products can be changed in many styles, in the process of producing different types of injection molding products, the requirements for the type of mold and the relevant standards will be relatively large differences. Therefore, before the mold processing, it is necessary to communicate with the customer about the details of the relevant requirements, and make clear the specific standards of the mold before the subsequent production and processing, so that the mold can better meet the subsequent production of related injection molding products.
 

3、Do a good job in the processing of mold venting
In the process of mold processing, it is important to pay attention to the work of venting hole reservation. If no air vent is reserved, air bubbles will be easily generated after the subsequent injection of the corresponding melt, which will affect the quality of the whole product. A good design of venting holes in the mold can better discharge the air bubbles in the melt and improve the quality of injection molding products.